Fire Suppression Systems

Request a free quote

Request a free quote by filling out the form or calling 757-720-4525


Fire suppression systems are designed to limit damage and control the spread of a fire before it can move to other areas of the facility. They are usually found in high-hazard areas where the sprinkler system would either be inadequate or impractical, and deploy a non-conductive clean agent in areas with sensitive equipment. Hazard type, square footage and system discharge speed are often considerations in determining the applicable suppression system.

Consult with your area’s Fire Marshall or Authority Having Jurisdiction (AHJ) to determine what is needed for your facility. Regular test, inspection and maintenance of special hazard suppression systems can help you stay prepared in the event of a fire emergency.


Consistent Fire Suppression System Service

Helps you stay compliant.

In fact, ongoing service is generally required by the NFPA and, likely, your local Authority-Having Jurisdiction (AHJ) – and you could be fined for non-compliance if you don't follow proper guidelines.

Insurance coverage eligibility.

Many insurance companies may not cover damages caused by fire unless a company has documented that routine checks and maintenance have been performed throughout their facility.

Helping you keep your equipment ready.

Many fire suppression systems require periodic testing and service to continue functioning properly.

Promotes safety.

Most important of all, having your suppression system properly serviced and functioning can save property and lives during a fire.


It's a fact: your kitchen is one of your facility's most at-risk locations, especially when it comes to a potential grease fire. Water can actually spread a grease fire, so an up-to-code suppression system can be vital. Cintas technicians are trained in suppression systems as well as NFPA requirements, and they're passionate about helping you avoid these common hazards.

Special Hazard Suppression Systems

A clean agent system can be good for your sensitive electrical and manufacturing equipment, because it can help extinguish a fire quickly and minimize damage. But that system has to be up to code, which is where Cintas' testing and inspection can help.

Cintas specializes in

Emergency service*
We're on call to diagnose and repair system problems — so you can be confident you'll have service when you need it.

Semi-annual inspections*
Depending on your system, a Cintas technician will examine your entire system including detectors, gas containers, releasing panels, manual pull stations, abort and auxiliary functions.

* Service may vary depending on service locations.